High Pressure Technology

Cleaning accessories and components

URA­CA of­fers a wide range of ac­ces­sories as sup­pli­er of sys­tems. You will find suit­able high pres­sure com­po­nents for each pos­si­ble case of ap­pli­ca­tion. The high pres­sure wa­ter can be de­flect­ed by means of a swiv­elling and ro­tat­ing tool.

Pul­sa­tion dam­pers and re­s­o­na­tors are suc­cess­ful­ly used to re­duce pres­sure fluc­tu­a­tions and thus se­cure the safe and ef­fi­cient op­er­a­tion of high pres­sure pumps and units.

Rotary transmission units - water jet turn -360° nonstop

De­flec­tion of high press­sure wa­ter will be used with hose reel sys­tems as well as ro­tat­ing clean­ing

noz­zles, e.g. floor clean­ers, etc.

DFM 105/400
DFM 105/400 To generate rotating tool movement with high-pressure water jet. Preferred application as cleaning tool, used in connection with suitable nozzle heads or positioning systems.

Brochure (pdf)
Nominal pressure PN 400 bar 5,800 psi
Recommended flow rate 60 - 400 l/min 15.9 - 105.7 USgpm
Weight 12.3 kg 12.3 kg
DFM 105/1200
DFM 105/1200 To generate rotating tool movement with high-pressure water jet. Preferred application as cleaning tool, used in connection with suitable nozzle heads or positioning systems.

Brochure (pdf)
Nominal pressure PN 1,200 bar 17,400 psi
Recommended flow rate 30 - 170 l/min 7.9 - 44.9 USgpm
Weight 12.3 kg 12.3 kg
DFM 105/2000
DFM 105/2000 To generate rotating tool movement with high-pressure water jet. Preferred application as cleaning tool, used in connection with suitable nozzle heads or positioning systems.

Brochure (pdf)
Nominal pressure PN 2,000 bar 29,000 psi
Recommended flow rate 10 - 60 l/min 2.6 - 15.9 USgpm
Weight 12.3 kg 12.3 kg
DFM 105/2800
DFM 105/2800 To generate rotating tool movement with high-pressure water jet. Preferred application as cleaning tool, used in connection with suitable nozzle heads or positioning systems.

Brochure (pdf)
Nominal pressure PN 2,800 bar 40,600 psi
Recommended flow rate 10 - 60 l/min 2.6 - 15.9 USgpm
Weight 10.2 kg 10.2 kg
DFF 2,5/3000
DFF 2,5/3000 To generate rotating tool movement with external drive. Preferred application as cleaning tool, used in connection with suitable nozzle heads or positioning systems.

Nominal pressure PN 3,000 bar 43,500 psi
Max. recommended flow rate 35 l/min 9.2 USgpm
Weight 27.5 kg 27.5 kg
DFF 106/1200
To generate rotating tool movement with external drive. Preferred application as cleaning tool, used in connection with suitable nozzle heads or positioning systems.

Nominal pressure PN 1,200 bar 17,400 psi
Recommended flow rate 30 - 170 l/min 7.9 - 44.9 USgpm
Weight 15.0 kg 15.0 kg

Resonators - maintenance-free pulsation dampening

Pres­sure pul­sa­tions on high pres­sure pumps of­ten have to be re­duced. Re­s­o­na­tors, i.e. pul­sa­tion dam­pers, are most suit­able for this pur­pose.

Re­s­o­na­tors give ex­cel­lent damp­ing re­sults within a wide range of pres­sures and pump speeds.
Brochure (pdf)